Abstract
Methods of removing phosphate from wastewater with a low phosphate concentration are of great environmental significance. In this study, immobilized beads were prepared by entrapping modified bentonite powder in calcium-alginate (Al-NaBT-CA), and the potential of the beads for phosphate removal from wastewater was investigated. The effects of pH (1–10) and initial phosphate concentration (0.5–50 mg/L) were also examined in batch experiments with Al-NaBT-CA beads. The optimum pH value for phosphate removal by Al-NaBT-CA beads was pH 3. In addition, a high initial phosphate concentration promoted phosphate adsorption. Adsorption kinetics showed that the adsorption of phosphate using beads followed a pseudo-second-order kinetic model (R2 = 0.98–0.99). The adsorption isotherm data was well fitted by the Sips adsorption model. The maximum phosphate adsorption capacity of the Al-NaBT-CA beads was 15.77 mg/g, which was slightly less than that of the modified powder. The specific surface area of the Al-NaBT-CA beads was 17.01 m2/g, and their average pore size was 13.41 nm. Scanning electron microscopy suggested that the high inner porosity and rough outer surface of the beads facilitated phosphate transfer.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
