Abstract
Per- and polyfluoroalkyl substances (PFASs) have been ubiquitously detected in drinking water which poses a risk for human exposure. In this study, the treatment efficiency for the removal of 15 PFASs was examined in a full-scale drinking water treatment plant (DWTP) in the City of Uppsala, Sweden, over a period of two years (2015–2017). Removal of the five frequently detected PFASs was influenced by the total operation time of granular activated carbon (GAC) filters, GAC type and surface loading rate. The average removal efficiency of PFASs ranged from 92 to 100% for “young” GAC filters and decreased to 7.0–100% for “old” GAC filters (up to 357 operation days, 29 300 bed volumes (BV) treated). Flow-rates were adjusted in two full-scale GAC filters of different operational age to examine the removal of PFAS and organic matter depending on GAC operational age and operating flow. The decrease in flow-rate by 10 L s−1 from 39 to 29 L s−1 led to an average increase of 14% and 6.5% in total PFAS removal efficiency for an “old” (264 operation days, 21 971 BV treated) and a “young” GAC filter (63 operation days, 5 725 BV treated), respectively. A cost-analysis for various operation scenarios illustrated the dominating effect of treatment goals and costs for GAC regeneration on overall GAC operation costs. The unit costs for GAC filters ranged from 0.08 to 0.10 € m−3 water treated and 0.020-0.025 € m−3 water treated for a treatment goal of 10 ng L−1 and 85 ng L−1, respectively, for ∑11PFAS. Furthermore, it was concluded that prolonging the GAC service life by lowering the flow-rates after reaching the treatment goal could lead to a 26% cost-deduction. The results and methods presented in this study give drinking water providers valuable tools for the operation of a full-scale treatment train for the removal of PFAS in contaminated raw water.
Highlights
Per- and polyfluoroalkyl substances (PFASs) are found ubiquitously in the abiotic and biotic environment (Ahrens, 2011)
Once PFASs are released into the aquatic environment, they pose a risk for our drinking water, as conventional treatment processes such as sandfiltration, coagulation, flocculation, sedimentation, oxidation and disinfection are ineffective for the removal of PFASs during the treatment of contaminated ground or surface water (Rahman et al, 2014)
Annual unit operations costs were calculated as annual operations cost as defined above divided by the actual annual volume of water treated at Ba€cklo€sa DWTP (i.e. 7 million m3)
Summary
Per- and polyfluoroalkyl substances (PFASs) are found ubiquitously in the abiotic and biotic environment (Ahrens, 2011). Drinking water treatment and respective GAC filtration should be optimized to the best extent, not the least in order to save costs arising due to the frequently necessary regeneration or exchange of filter material (Takagi et al, 2011; Rahman et al, 2014). Until this point, little is known concerning optimization and long-term removal efficiency of PFASs in full-scale DWTPs. In this study, the removal of PFASs in a full-scale DWTP in the City of Uppsala, Sweden, was examined. The specific objectives of this study included to i) investigate the removal of PFAS in a full-scale DWTP, ii) evaluate the long-term performance of GAC for the removal of PFASs, iii) assess the impact of the GAC age and flow-rate on the removal of PFASs, and iv) to estimate the operations costs for the removal of PFASs using GAC at different treatment scenarios
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
