Abstract
Adsorption is the most common methods used in industry for the removal of dye. In this study, magnetic multi-walled carbon nanotubes (MMWCNTs) was served as adsorbent for the removal of methylene blue (MB). Statistical optimization of the MB removal efficiency via response surface methodology coupled with central composite design was performed and reported. It was observed that all three experimental parameters: adsorption temperature (25-50°C), MB concentration (10-50 ppm) and MMWCNTs dosage (0.01-0.05 g/20mL) were significant in the removal of MB. The optimized conditions of 99.21 % MB removal efficiency can be achieved at adsorption temperature of 38°C, MB concentration of 23 ppm and MMWCNTs dosage of 0.033 g/20mL. The verification of the prediction was performed with 3 repeated experiments and the results were found to be in good agreement with the experimental data with only 0.21 % error.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Materials Science and Engineering
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.