Removal of metal ions in aqueous solutions by organic polymers: use of a polydiphenylamine resin

Abstract

Adsorption of Ni(II), Cu(II), Zn(II), Pb(II) and Cd(II) ions on a polydiphenylamine resin prepared at a strongly oxidizing controlled potential of 3.2 V (vs. ECS) was studied in aqueous solutions. The optimum sorption conditions were determined. The optimum pH for the removal of metal ions was between 4 and 6 for Ni(II), 6 for Cu(II) and Pb(II) and 5 for Zn(II) and Cd(II). The total sorption capacity of the resin was 57.3 mg g −1 for Ni(II), 23 mg g −1 for Cu(II), 36.9 mg g −1 for Zn(II), 19 mg g −1 for Pb(II) and 24.5 mg g −1 for Cd(II). The sorption capacity was compared with other conventional chelating polymers. The sorption kinetics was fairly rapid, as apparent from the loading half time ( t 1/2) values, indicating a better accessibility of the chelating sites. The study of the selectivity of the metal ions in the binary solutions shows that the resin presents a higher affinity for the ions of nickel (II).