Abstract
AbstractThe present study provides an electrocoagulation process for the removal of manganese (Mn) from water using magnesium as anode and galvanised iron as cathode. The various operating parameters like effect of initial pH, current density, electrode configuration, inter‐electrode distance, coexisting ions and temperature on the removal efficiency of Mn were studied. The results showed that the maximum removal efficiency of 97.2% at a pH of 7.0 was achieved at a current density 0.05 A/dm2 with an energy consumption of 1.151 kWhr/m3. Thermodynamic parameters, including the Gibbs free energy, enthalpy and entropy, indicated that the Mn adsorption of water on magnesium hydroxides was feasible, spontaneous and endothermic. The experimental data were fitted with several adsorption isotherm models to describe the electrocoagulation process. The adsorption of Mn preferably fitting the Langmuir adsorption isotherm suggests monolayer coverage of adsorbed molecules. In addition, the adsorption kinetic studies showed that the electrocoagulation process was best described using the second‐order kinetic model at the various current densities. © 2012 Canadian Society for Chemical Engineering
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
