Removal of heavy metals from dredging marine sediments via electrokinetic hexagonal system: A pilot study in Italy

Abstract

Listen

Translate article

Among the several treatment options, electrokinetic (EK) remediation is recognized as an effective technique for the removal of heavy metals from low-permeability porous matrices. However, most of the EK decontamination research reported was performed on linear configuration systems at a laboratory scale. In this study, a series of experiments were performed on a pilot-scale system where the electrodes were arranged in a hexagonal configuration, to assess the improvement of the EK process in the removal of inorganic contaminants from sediments dredged in the harbor of Piombino, Italy. HNO3 was used as acid conditioning and both pH effect and treatment duration time were investigated. Sediment characterization and metal fractionation were also presented, in order to understand how the bioavailability of metals affects the process efficiency. The increase in pH due to the buffering capacity of the sediment in the sections close to the cathode favored the precipitation and accumulation of metals. However, the results highlighted that longer treatment times, combined with an efficient pH reduction, can improve treatment performance, resulting in high removal efficiencies for all the target metals considered (a percentage removal greater than 50% was reached for Cd, Ni, Pb, Cu and Zn). Compared to different EK configuration systems, the hexagonal configuration arrangement applied in our study provides better results for the remediation of dredged marine sediment.