Abstract
An experimental study was conducted on the chelation and electrolytic foam separation of trace amounts of copper, nickel, zinc, and cadmium from a synthetic chelated metal wastewater. Sodium ethylenediaminetetraacetate (EDTA), citrate, sodium diethyldithiocarbamate (NDDTC), and potassium ethyl xanthate (KEtX) were used with sodium dodecylsulfate (NaDS) as a foam-producing agent. Experimental results from an electrolytic foam separation process showed that chelating agents NDDTC and KEtX, due to their higher chelating strength and hydrophobic property, can efficiently separate Cu and Ni from chelated compounds (Cu, Ni/EDTA, and Cu, Ni/citrate). In a Cu-EDTA-NDDTC system with a chelating agent/metal ratio of 4, the residual Cu(II) concentration is 0.7 mg/L. The effects of chelating agent types and different chelating agents concentrations on the removal of metal ions were studied. The effect of NaDS dosage on flotation behavior and the efficiency of metal removal were also investigated.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.