Removal of Heavy Metal Ions by Ferrihydrite: an Opportunity to the Treatment of Acid Mine Drainage

Abstract

Ferrihydrite is often an initial precipitate resulting from the neutralization of Fe(III) solution, and it seems to be one of the products of acid mine drainage forming reactions. Since having the adsorption properties, ferrihydrite can be effective for the remediation of acid mine drainage. This study prepared fresh ferrihydrite by the rapid hydrolysis of Fe(III) ions and investigates its adsorptive behaviours toward Pb(II), Cu(II), and Zn(II). When the sorption data were presented in plot of percent sorbed versus pH, it was found that sorption is strongly dependent on the solution pH and increasing as expected at higher pH for all metal ions investigated. All the observed metal cation sorption began at pH values below zero point charge (ZPC) of ferrihydrite (pH = 7.8–8.0), and almost all removal are achieved at pH values lower than that related metal hydroxide obtained. Enhanced removal of metal ions, as the pH of the solution and initial metal ion concentration are increased, was attributed to surface precipitation of metal hydroxide. The existence of ferrihydrite and adsorption of metal ions onto surfaces are favouring surface precipitation of metal ions at lower pH values than that for metal ion only. Depending on the pH of the solution and initial metal ion concentration, more than one mechanism such as adsorption by complexation and surface precipitation was responsible for the removal.