Abstract
AbstractThis study reports on the adsorption isotherm and kinetics of arsenic and/or fluoride by the hybrid iron–aluminum electrocoagulation in a batch reactor. The experiments were performed at a condition of current densityJ = 9.9 mAcm−2; time = 50 min; and pH = 7.5, at variable initial concentrations. The flocs surfaces were characterized using Fourier transform infrared spectroscopy and X‐ray powder diffraction that revealed presence of AlAsO4·2(H2O), AlF2OH, and FeOOAs. Adsorption of fluoride and arsenic in both systems followed Freundlich and Langmuir models. The adsorption processes for fluoride and arsenic were spontaneous and physical in nature with monolayer maximum adsorption capacities of 76.4 and 1.14 mg/g, respectively in single systems. In a binary component system, the adsorption capacity of arsenic was 0.06 mg/g while that of fluoride became 75.6 mg/g as evaluated using extended Langmuir and extended Freundlich models. Moreover, the kinetics of fluoride and/or arsenic adsorption followed the pseudo second‐order model. The remediation of fluoride and arsenic from water by Al–Fe oxyhydroxide were found to be through ionic exchange and electrostatic attraction, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
