Abstract
Oil pollution is a serious environmental concern which is caused by rapid industrial development around the world. In this study, corn cob carbon was used as a natural adsorbent for emulsified oil wastewater remediation. Three parameters that were studied include contact time, dosage of corn cob carbon and concentration of emulsified oil wastewater. The physical and chemical structures of raw and corn cob carbon were characterized. The corn cob carbon showed good efficiency in emulsified oil removal with a percentage of 96% at 2 hours contact time, 1 g of corn cob carbon and 5% of emulsified oil wastewater concentration. The apparent porosity of corn cob carbon was the reason for the sinking of emulsified oil particles absorbed on the surface of corn cob carbon. TGA shown 3.60% and 58.17% of mass loss within the first and second thermal decomposition, respectively. The functional groups of corn cob samples are C-H, -C≡C-, C=C, -C-H and C-O. SEM analysis showed that pores were found in the corn cob carbon and a layer of oil was present on its surface after the adsorption process. Therefore, corn cob carbon could be considered as an alternative to remove emulsified oil in wastewater due to its good adsorption capacity and low secondary pollution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: IOP Conference Series: Earth and Environmental Science
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.