Abstract
In present research, a simplistic hydrothermal method was adopted for one-step synthesis of nanozeolite beta (NZB) having an average particle size of 18nm with Si/Al ratio 46.67, surface area 328m2/g, pore volume 0.287cm3/g, and pore diameter 3.5nm. The surface of the synthesized NZB was modified with 0.5wt% hexadecyltrimethylammonium bromide (HDTMA-Br) and used as an adsorbent for the removal of two phytoestrogens daidzein and coumestrol from aqueous solutions. The surface properties and surface charge of NZB considerably changed after modification with HDTMA-Br, which resulted in enhanced removal of daidzein (92–98% from 7 to 27%) and coumestrol (93.5–99% from 5 to 9.2%). The surface modified zeolite beta (SMZB) has similar physical characteristics as of NZB with an average particle size of 20nm, surface area 299.8m2/g, pore volume 0.263cm3/g, and pore diameter 3.51nm. The influence of various parameters was examined by conducting a sequence of batch experiments. The adsorption equilibrium was achieved in less than 3h with saturation capacity of 40.74mg/g and 42.87mg/g for daidzein and coumestrol, respectively. The Freundlich isotherm and fractional order kinetic models represented the adsorption data very closely. The thermodynamic parameters indicated that sorption of both phytoestrogens onto SMZB is spontaneous and exothermic.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.