Abstract
Fixed-bed column studies were conducted to evaluate the potential of co-immobilized (activated carbon and Bacillus subtilis) (CI) beads for the removal of Cr(VI) from aqueous solution. The impact of various parameters such as initial Cr(VI) concentrations (100, 150, and 200 mg/L), flow rate (3, 9, and 15 mL/min), and bed depth (10, 15, and 20 cm) on Cr(VI) adsorption onto CI beads were investigated. The breakthrough time increased with a decrease in initial Cr(VI) concentration and flow rate, and an increase in bed height. The breakthrough data obtained for Cr(VI) removal was more adequately described by the Thomas model with high correlation coefficients (R 2 = 0.982). The eluent, 0.1 M NaOH, provided high elution efficiencies (~90 %) in all the six cycles. Obtained results pointed out that CI beads could potentially be used for the removal of Cr(VI) from aqueous solution.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
