Abstract
This paper reports the feasibility of using pre-consumer processing agricultural waste to remove Cr(VI) from synthetic wastewater under different experimental conditions. For this, rice husk, has been used after pre-treatments (boiling and formaldehyde treatment). Effect of various process parameters, namely, pH, adsorbent dose, initial chromium concentration and contact time has been studied in batch systems. The removal of chromium was dependent on the physico-chemical characteristics of the adsorbent, adsorbate concentration and other studied process parameters. Maximum metal removal was observed at pH 2.0. The efficiencies of boiled and formaldehyde treated rice husk for Cr(VI) removal were 71.0% and 76.5% respectively for dilute solutions at 20 g l −1 adsorbent dose. The experimental data were analyzed using Freundlich, Langmuir and Dubinin–Radushkevich (D–R) isotherm models. It was found that Freundlich and D–R models fitted well. The results revealed that the hexavalent chromium is considerably adsorbed on rice husk and it could be an economical method for the removal of hexavalent chromium from aqueous systems. FTIR and SEM were recorded, before and after adsorption, to explore number and position of the functional groups available for Cr(VI) binding on to studied adsorbents and changes in adsorbent surface morphology.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
