Removal of Cr and Organic Matter from Real Tannery Wastewater via Fenton-like Process Using Commercial Nano-Scale Zero-Valent Iron

Abstract

The tannery wastewater from the tanning stage (TWT) comprises organic and Cr pollutants, which can adversely affect aquatic life and have carcinogenic effects. In this study, we investigated the performance of a Fenton-like process using commercial Nano-scale zero-valent iron (nZVI) for the simultaneous removal of Cr and organic matter from real TWT. We used an experimental design to select the principal operating parameters. A Plackett–Burman design identified variables for Cr-total and COD removal, followed by a central composite design (CC-D) to determine optimal variable levels. Finally, the response surface methodology (RSM) was used to find the optimum concentration of individual variables influencing Cr-total removal. Additionally, the effect of the leather-related, co-existing substances that influenced the efficiency of the process and the possibility of recycling nZVI were explored. The inclusion of nZVI was significantly more effective at removing both Cr-total and COD (97.3% ± 5.7% and 73.9% ± 9.1%, respectively), whereas the traditional Fenton process achieved lower removal rates (55.6% ± 10.0% for Cr-total and 34.8% ± 10.9% for COD). The optimal conditions for the Fenton-like process were nZVI/H2O2 = 1.05 w/w, and pH = 2.93. We obtained the best results during the first 5 min of the reaction, which increased after 48 h of agitation and subsequent neutralization. According to the results of four consecutive cycles, nZVI exhibited high reusability (97%) without compromising its adsorption potency. XPS analysis confirmed Cr removal through the adsorption mechanism on the nZVI surface. Hence, a Fenton-like process based on nZVI can be used as a promising alternative for treating organic and Cr wastewater.