Abstract
The sorption of copper and cadmium ions using activated carbon,kaolin, bentonite, diatomite and waste materials such as compost,cellulose pulp waste and anaerobic sludge as sorbents is reported. Equilibrium isotherms were obtained for the adsorption of these metals in single and binary solutions. Bentonite presented the highest adsorption capacities for both copper and cadmium. A competitive uptake was observed when both metals are present; copper being preferentially adsorbed by all materials with theexception of anaerobic sludge. Equilibrium data were fitted toLangmuir and Freundlich models, with satisfactory results for most of the adsorbent-metal systems studied.Of all the adsorbents studied, bentonite and compost presentedthe highest removal efficiencies, reaching 99% for copper whencadmium is also present, for initial solution concentrations ofup to 100 mg L-1. Anaerobic sludge has a greater preferencefor cadmium, even in the presence of copper, with removal efficiencies of 98% for similar concentrations to those mentioned above.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
