Removal of Congo red dye from aqueous solution with nickel-based metal-organic framework/graphene oxide composites prepared by ultrasonic wave-assisted ball milling

Abstract

Metal-organic frameworks (MOFs) were successfully synthesized by ultrasonic wave-assisted ball milling. In the absence of organic solvent, the coupling effect of ultrasonic wave and mechanical force played an significant role in the synthesis of MOFs. Adsorption of Congo red (CR) was studied in view of adsorption kinetic, isotherm and thermodynamics. The adsorbent was carried out using X-ray diffraction (XRD), thermogravimetric analysis (TGA), N2 adsorption-desorption isotherms, Raman spectroscopy and scanning electron microscope (SEM) methods. It was found that pseudo-second-order kinetic model and Freundlich adsorption isotherm matched well for the adsorption of CR onto nickel-based metal-organic framework/graphene oxide composites (Ni-MOF/GO). The results of the adsorption thermodynamics indicated that the adsorption process was a spontaneous and endothermic process. The adsorption capacity of graphene oxide/metal-organic frameworks (GO/MOFs) for CR reached 2489mg/g, much higher than previous reports. It was demonstrated that an increase in the number of active metal sites can dramatically improve the adsorption capacity of dye. A suitable dry temperature is beneficial for the improvement of adsorption capacity for dye. In this paper, the adsorption results indicated that ultrasonic wave-assisted ball milling has a good prospect for synthesis of MOFs with excellent adsorption performance.