Abstract
Two spherical composite adsorbents namely polyacrylonitrilepotassium cobalt hexacyanoferrates (PAN-KCoCF) and polyacrylonitrilepotassium nickel hexacyanoferrates (PAN-KNiCF) were synthesized. The effects of liquid flow rate, bed height and presence of other cations on the adsorption of cesium were investigated by conducting fixed-bed columns. The results showed that the column performed well at lowest flow rate for PAN-KNiCF. Flow rate examined had little influence on the adsorption of PAN-KCoCF. The breakthrough time decreased with decreasing bed height for both PAN-KCoCF and PAN-KNiCF. In addition, the existence of K+, Na+, NH4+, Ca2+and Mg2+in solution caused a reduction of maximum adsorption capacity for both of the composites. The bed depth service time (BDST) model and the Thomas model were used to analyze the experimental data and the model parameters were evaluated. Good agreement of the experimental breakthrough curves with the model predictions was observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
