Abstract
Waste crab shell, which has some functional groups like -NHCO or NO2 groups, was used as an adsorbent to remove arsenate ions (As (V)). The functional groups in crab shells were confirmed by FT-IR analysis. Waste crab shell had a high uptake capacity of 35.92 mg/g-dry mass for arsenate ion at pH 4, and the regression curve using the Langmuir isotherm equation fit well with the experimental data. The effects of pH, loading of crab shells, and time on uptake capacity of arsenate ions were also investigated. The adsorption capacity of arsenate ions was increased as the pH value was increased because the amount of negative arsenic species increased as the pH value was increased. Waste crab shells could remove arsenate ions of about 45% with 0.5 g of loading amount, and adsorption of arsenate ions was almost completed in 30 min when initial concentration of arsenate ions was 100 and 9.3 mg/L, respectively. Considering recycling of crab shell, it could be an economical and promising adsorbent.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.