Removal of arsenic(V) from spent ion exchange brine using a new class of starch-bridged magnetite nanoparticles

Abstract

Ion exchange (IX) is considered by US EPA as one of the best available technologies for removing arsenic from drinking water. However, typical IX processes will generate large volumes of arsenic-laden regenerant brine that requires costly further handling and disposal. This study aimed to develop an engineered strategy to minimize the production and arsenic leachability of the process waste residual. We prepared and tested a new class of starch-bridged magnetite nanoparticles for removal of arsenate from spent IX brine. A low-cost, “green” starch at 0.049% (w/w) was used as a stabilizer to prevent the nanoparticles from agglomerating and as a bridging agent allowing the nanoparticles to flocculate and precipitate while maintaining their high arsenic sorption capacity. When applied to a simulated spent IX brine containing 300 mg/L As and 6% (w/w) NaCl, nearly 100% removal of arsenic was achieved within 1 h using the starch-bridged nanoparticles at an Fe-to-As molar ratio of 7.6, compared to only 20% removal when bare magnetite particles were used. Increasing NaCl in the brine from 0 to 10% (w/w) had little effect on the arsenic sorption capacity. Maximum uptake was observed within a pH range of 4–6. The Langmuir capacity coefficient was determined to be 248 mg/g at pH 5.0. The final treatment sludge was able to pass the TCLP (Toxicity Characteristic Leaching Procedure) based leachability of 5 mg/L as As.