Abstract
The modification of polymeric materials (polystyrene and polyHIPE) by coating their surface with appropriate adsorbing agents (i.e. iron hydroxides) was investigated in the present work, in order to apply the modified media in the removal of inorganic arsenic anions from contaminated water sources. The method, termed adsorptive filtration, has been classified as an emerging technology in water treatment processes as it presents several advantages towards conventional technologies: the production of high amounts of toxic sludge can be avoided and it is considered as economically more efficient; whereas it has not yet been applied in full-scale treatment plants for low-level arsenic removal. The present experiments showed that both modified media were capable in removing arsenic from the aqueous stream, leading to residual concentration of this toxic metalloid element below 10 μg/L, which is the new maximum concentration limit set recently by the European Commission and imposed by the USEPA. Though, among the examined materials, polyHIPE was found to be more effective in the removal of arsenic, as far as it concerns the maximum sorptive capacity before the filtration bed reaches the respective breakthrough point.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.