Removal of Antimonite (Sb(III)) and Antimonate (Sb(V)) from Aqueous Solution Using Carbon Nanofibers That Are Decorated with Zirconium Oxide (ZrO2).

Abstract

Zirconium oxide (ZrO2)-carbon nanofibers (ZCN) were fabricated and batch experiments were used to determine antimonite (Sb(III)) and antimonate (Sb(V)) adsorption isotherms and kinetics. ZCN have a maximum Sb(III) and Sb(V) adsorption capacity of 70.83 and 57.17 mg/g, respectively. The adsorption process between ZCN and Sb was identified to be an exothermic and follows an ion-exchange reaction. The application of ZCN was demonstrated using tap water spiked with Sb (200 μg/L). We found that the concentration of Sb was well below the maximum contaminant level for drinking water with ZCN dosages of 2 g/L. X-ray photoelectron spectroscopy (XPS) revealed that an ionic bond of Zr-O was formed with Sb(III) and Sb(V). Based on the density functional theory (DFT) calculations, Sb(III) formed Sb-O and O-Zr bonds on the surface of the tetragonal ZrO2 (t-ZrO2) (111) plane and monoclinic ZrO2 planes (m-ZrO2) (111) plane when it adsorbs. Only an O-Zr bond was formed on the surface of t-ZrO2 (111) plane and m-ZrO2 (111) plane for Sb(V) adsorption. The adsorption energy (Ead) of Sb(III) and Sb(V) onto t-ZrO2 (111) plane were 1.13 and 6.07 eV, which were higher than that of m-ZrO2 (0.76 and 3.35 eV, respectively).