Abstract
The removal of Solvent Yellow 1 in a range from 0.25 to 10 ppm by weight from an aqueous solution using a predispersed solvent extraction (PDSE) was investigated and compared with conventional solvent extractions in batch mode. Colloidal liquid aphrons (CLAs) made out of kerosene were used as a predispersed organic solvent. To form CLAs, Tergitol 15-S-3 and sodium dodecylbenzene sulfonate were used as oil-soluble and water-soluble surfactants, respectively. The ratio of solvent volume to pregnant solution volume was less than 0.025. The efficiency of the extraction with CLAs can be higher than that of a single-staged conventional extraction process with a shorter contact time. The recovery of used CLAs with a colloidal gas aphrons (CGAs) flotation was measured using different surfactants. CLAs with an extremely large surface area can also reduce processing time and energy cost. PDSE is therefore a promising process for the removal of organic materials from water.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
