Removal of algae and algogenic odor compounds via combined pre-chlorination and powdered activated carbon adsorption for source water pretreatment

Abstract

This study investigated the combination sequence and time interval of chlorination and powdered activated carbon (PAC) adsorption for the control of algae inactivation, algogenic odor removal, and disinfection by-product (DBP) formation. Results indicated that pre-chlorination/post-PAC exhibited the highest algae removal efficiency in all sequential combinations of PAC adsorption and chlorination, while it had displayed slight effect on the removal of DBPs. The evaluated sequential combinations all had significant effect on the removal of odor. Nevertheless, prolonged time interval between chlorination and PAC adsorption exhibited enhanced control of algae and odor compounds in all experiments; with increasing time interval from 0 to 15 min in pre-chlorination/post-PAC process, the removal efficiency of Chl-a, algal cell viability, GSM, and 2-MIB increased by 46%, 15%, 15% and 23%, respectively. In the combined processes, the odor removal efficiency was positively correlated with PAC dosage but negatively correlated with chlorine dosage. Furthermore, PAC addition could effectively reduce the total DBP yields, especially the N-DBPs. This study can provide a better understanding of improving in-situ operation of the pre-chlorination and PAC dosing systems for source water pretreatment.