Abstract
An alternative chitosan-based adsorbent modified by impregnation with deep eutectic solvent (DES) choline-chloride:urea at a molar ratio 1:2 proved efficient removal of the anthraquinone dye Acid Blue 80 (AB80) from aqueous solutions, and offered enhanced adsorption capacity compared to the starting materials. The adsorption was mainly affected by initial AB80 concentration, adsorbent dosage, contact time, and slightly influenced by temperature (25–45 °C), and pH (3.5–10). The pseudo-second-order kinetic model fitted the experimental data, and pseudo-first order model fitted as well at the highest AB80 concentration, 250 mg/L. The experimental data agreed with the Langmuir isotherm model, with a maximum adsorption capacity of 61.64 mg/g at 35 °C. The process was exothermic above 100 mg/L of dye and spontaneous up to 200 mg/L (T < 35 °C). The adsorbent could be reused without further treatment at least 5 times providing ≥40% removal, whereas the dye could be efficiently recovered by NaOH desorption. Electrostatic interactions as well as physisorption could explain the adsorption behavior.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.