Removal mechanisms and kinetics of trace tetracycline by two types of activated sludge treating freshwater sewage and saline sewage

Abstract

Understanding the removal mechanisms and kinetics of trace tetracycline by activated sludge is critical to both evaluation of tetracycline elimination in sewage treatment plants and risk assessment/management of tetracycline released to soil environment due to the application of biosolids as fertilizer. Adsorption is found to be the primary removal mechanism while biodegradation, volatilization, and hydrolysis can be ignored in this study. Adsorption kinetics was well described by pseudo-second-order model. Faster adsorption rate (k 2 = 2.04 × 10−2 g min−1 μg−1) and greater adsorption capacity (q e = 38.8 μg g−1) were found in activated sludge treating freshwater sewage. Different adsorption rate and adsorption capacity resulted from chemical properties of sewage matrix rather than activated sludge surface characteristics. The decrease of tetracycline adsorption in saline sewage was mainly due to Mg2+ which significantly reduced adsorption distribution coefficient (K d) from 12,990 ± 260 to 4,690 ± 180 L kg−1. Species-specific adsorption distribution coefficients followed the order of K_{mathrm{d}}^{{ + 00}} gg K_{mathrm{d}}^{{ + - 0}} > K_{mathrm{d}}^{{ + - - }} . Contribution of zwitterionic tetracycline to the overall adsorption was >90 % in the actual pH range in aeration tank. Adsorption of tetracycline in a wide range of temperature (10 to 35 °C) followed the Freundlich adsorption isotherm well.Electronic supplementary materialThe online version of this article (doi:10.1007/s11356-012-1213-5) contains supplementary material, which is available to authorized users.