Abstract

This research investigates commercial activated carbon (AC) potential to remove methyl orange (MO) dye removal from aqueous solution using a batch process. The AC material was characterized using FTIR spectroscopy and SEM analysis. The effect of the main operating parameters, such as the pH, adsorbent dosage, contact time, and initial dye concentration, was studied. MO removal could be accomplished within 30 min at a pH value of 3. The calculated maximum MO adsorption capacity onto activated carbon was 129.3 mg/g, while the removal efficiency was 97.8%. Adsorption results were analyzed by studying the Langmuir and Freundlich isotherm models. The MO adsorption data on activated carbon were better explained by the Langmuir isotherm than by the Freundlich isotherm. The pseudo-second-order kinetic model may have had an effect on the MO dye adsorption on AC material. This research showed that the commercial activated carbon can be used as an effective sorbent for MO removal from wastewater sample. Moreover, the AC material has good reusability and practical utilization capacities.

Full Text
Paper version not known

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call