Removal and tribological behaviors of waxy deposition layer in cleaning process

Abstract

PurposeThe wax deposition in oil wells and pipelines is very viciously negative to the petroleum extraction and crude oil transportation, and it even causes severe blockage accident. This study aims to describe cleaning experiments performed on wax deposition of different deposition layer and experimental conditions to investigate the removal and tribological properties and chip formation.Design/methodology/approachAn optical arrangement was used to visually record the cleaning process, whereas the friction forces were measured by a custom-built tribometer. Various measurements were performed with tool rake angles of 45° and −30° and cleaning depths from 1 to 5 mm.FindingsResults from experiments and modeling suggest that the transition of chip was dependent on rake angle, wax performance and cleaning depth. While the cleaning depth increased, the friction and cleaning resistant force also increased. With the increase of cleaning depth, the wax layer cleaning quantity increased and the chip strengthened; hence, the curvature radius of chip was enhanced to form platy chip. The chip of wax–oil mixture was discontinuous units, and it was easy to adhere on the rake face with the increasing depth of cut. With an increase in cleaning depth, the friction and cleaning-resistant force also increased.Originality/valueIt is concluded that for effectively cleaning and stabilizing of pipeline cleaning machine, different cleaning parameters should be applied to accommodate wax layer or wax–oil mixture.