Abstract

The biosorption process for the removal of nickel(II) by loofa sponge-immobilized biomass of Chlorella sorokiniana (LIBCS), a newly developed immobilized biosorbent, was characterized. Effects of environmental factors on metal uptake capacity of LIBCS were studied and compared with free biomass of C. sorokiniana (FBCS). Nickel(II) removal by LIBCS was found to be influenced by pH of the solution, initial metal concentration, and biomass concentration. The biosorption of nickel(II) ions by both LIBCS and FBCS increased as the initial concentration of nickel(II) ions increased in the medium. No loss to biosorption capacity of LIBCS for nickel(II) was found due to the presence of loofa sponge, indeed as compared to FBCS an increase of 25.3% was noted in the biosorption capacity of LIBCS. Maximum biosorption capacities for FBCS and LIBCS were found as 48.08 and 60.38 mg nickel(II)/g, respectively, whereas the amount of nickel(II) ions adsorbed on the plain loofa sponge was 6.1 mg/g. During these biosorption studies, LIBCS exhibited excellent physical and chemical stability without any significant release/loss of microalgal biomass from loofa sponge matrix. The kinetics of nickel(II) removal was extremely fast reaching at equilibrium in about 15 min for LIBCS and 20 min for FBCS. The biosorption equilibrium was well described by the Langmuir and Freundlich adsorption isotherms. The biosorption capacities were found to be solution pH dependent and the maximum adsorption was found at a solution pH 4–5. The LIBCS could be regenerated using 75 mM HCl, with up to 98% recovery. The LIBCS were shown to be robust and stable with little decrease in the nickel(II) uptake capacity when used in consecutive seven biosorption–desorption cycles. Continuous removal of nickel(II) from electroplating effluent by LIBCS packed in fixed bed column bioreactor confirm the possibility of developing a biological treatment process for the removal of toxic metals from authentic wastewater.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call