Abstract

The removal and recovery of chromium(III) (Cr3+) from aqueous solutions with a spheroidal cellulose adsorbent containing the carboxyl anionic group was investigated. The adsorption of Cr3+ ion on the adsorbent has been found to be time, concentration, pH, and temperature dependent. The adsorption process follows both the Freundlich and Langmuir adsorption isotherms, and has been found to be endothermic (enthalpy change, deltaH = 31.35 kJ/mol). The Cr3+ ion adsorbed on the adsorbent can be recovered by treating with a sodium hydroxide (NaOH) or hydrochloric acid (HCl) solution in one of two methods, static desorption or mobile desorption (column operation). A 1.2 mol/L HCl aqueous solution was finally chosen to recover the Cr3+ ion using column operation. The recovery percentage is approximately 85.2%. The exhausted column can be chemically regenerated by treatment with 1 mol/L NaOH aqueous solution and no dismantling is required. The adsorption mechanism is explained on the basis of complexation and ion exchange, between which the complexation adsorption is predominant.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.