Removal and Isolation of Germ‐Rich Fractions from Hull‐less Barley Using a Fitzpatrick Comminuting Mill and Sieves

Abstract

ABSTRACTA process was developed to produce a germ‐enriched fraction from hull‐less barley using a Fitzpatrick comminuting mill (FitzMilling) followed by sieving. Hulled and hull‐less barleys contain 1.5–2.5% oil and, like wheat kernels, which contain wheat germ oil, much of the oil in barley kernels is in the germ fraction. A process that combined FitzMilling and sieving produced a germ‐enriched fraction with an oil content of ≈15% and a yield of ≈1.1%. For comparison, this is higher than the levels of oil in most samples of commercial wheat germ. Experimental conditions were also described to produce a germ‐enriched fraction with a higher yield (2.16%), but it would have lower oil content (10.24%). Germination and compositional analysis studies suggested that FitzMilling hull‐less barley for 2 min or longer reduced germination rates to 1% or less, which was interpreted to mean that almost the entire viable germ was removed. In contrast, FitzMilling conventional hulled barley for 4 min had no effect on germination, and milling for 6 and 8 min resulted in germination rates of 36 and 12%, respectively. The oil extracted from germ‐enriched fractions was rich in free phytosterols (≈1%), phytosterol esters (3–7%), and free fatty acids (2–10%). These germ‐enriched fractions and the extracted oil they contain may have value as nutraceuticals or premium edible oils.