Remote sensing of indoor thermal environment from outside the building through window opening gap by using infrared camera.

Abstract

Investigation of housing indoor temperature is important for understanding the comfort, health and living conditions of the local residents. The traditional method to measure indoor temperature is to place sensors at the target places, which is not only expensive but also inconvenient for indoor temperature investigation, especially for the investigation at community and city scale. In this study, a novel method was proposed to obtain the indoor temperatures remotely from outside the building through window opening area using and infrared camera. Compared with the traditional contact measurement method, the proposed remote sensing method could detect the indoor temperature without entering the room. Moreover, the infrared image could reflect the spatial distribution information of indoor temperature. To verify the feasibility and accuracy of this method, an experiment was conducted in a test room under heating, transitional, and cooling conditions with various window opening grades. It was found that the infrared images at the window opening area could reflect the spatial distribution of indoor temperature with an accuracy within 0.5 °C under stable heating and transitional conditions. In the fan coil cooling condition, however, although the infrared image can reflect the cold air flow pattern, the deviations between the infrared temperature and the measured room temperature exceeded 1.0 °C. The effect of window opening grade on the recognition accuracy kept within 0.5 °C.