Abstract

AbstractBACKGROUNDThe accumulation of unwanted microorganisms on wetted surfaces, leading to surface damage and contamination, is a common and significant global issue.RESULTSHerein, we report a novel technique where the growth of microorganisms can be readily controlled by coating the surfaces with a polydimethylsiloxane (PDMS)/Mn0.8Zn0.2Fe2O4 (manganese‐zinc ferrite) nanocomposite followed by applying alternating magnetic field (AMF). The PDMS/MnZn ferrite nanocomposite is light weight and thermally stable (up to ∼ 330 °C) that can form a flexible coating. PDMS also provides hydrophobicity, which is further enhanced by the addition of Mn and Zn. The improved hydrophobicity makes the coated surface less susceptible to biofilm formation. When external AMF was applied to nanocomposites containing various MnZn ferrite nanoparticle loads of 10%, 20% and 30%, the temperature of the surface of nanocomposites reached to 80, 120 and 160 °C, respectively. Successful biofilm deactivation was achieved by heating the nanocomposites via AMF application, as shown in the biofilm test where up to ∼ 70% of the Pseudomonas aeruginosa PAO1 biofilm cells were killed when the AMF was applied for 20 min to the nanocomposites containing 30% nanoparticles.CONCLUSIONCoating the surface with PDMS/MnZn ferrite nanocomposites followed by applying external AMF can be an effective way to remove biofilm remotely in a wide range of applications. © 2019 Society of Chemical Industry

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.