Remarkable change in the broadband electrical behavior of poly(vinylidene fluoride)–multiwalled carbon nanotube nanocomposites with the use of different processing routes

Abstract

ABSTRACTPoly(vinylidene fluoride) (PVDF) nanocomposites have plenty of applications in the electronic realm. In this study, we produced nanocomposites based on PVDF and multiwalled carbon nanotubes (MWCNTs), with various MWCNT loadings, using three different processing routes: solution mixing, melt mixing, and electrospinning. The broadband electrical behavior of these nanocomposites was studied and compared via impedance spectroscopy. The morphologies of the nanocomposites were characterized by transmission electron microscopy and scanning electron microscopy. The results reveal that the electrical behaviors of the samples were completely different according to the processing route used. Solution mixing was the most suitable method for producing nanocomposites with the highest conductivities, at low MWCNT loadings, whereas electrospinning was the most suitable method for producing nanocomposites with the lowest dielectric permittivity. These differences were attributed to the different arrangements of the MWCNTs caused by the different processes. Although the solution‐mixed samples exhibited long and twisted MWCNTs, the melt‐mixed samples had shorter MWCNTs, and the electrospun samples had MWCNTs embedded and aligned inside the insulating polymer nanofibers. Thus, these results project a vast horizon for tailoring the structure and thereby the broadband electrical behavior of PVDF–MWCNT nanocomposites for different types of applications. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019, 136, 47409.