Abstract
In this study, various fatigue damage models proposed by researchers have been briefly discussed and found that the models are problem specific and their efficacy needs to be checked for high cyclic fatigue cases such as in railway bridges. Towards this, field studies were conducted to obtain the strain responses from a steel bridge during the passage of scheduled trains and test train formation with enhanced axle loading. Instrumentation was carried out at critical locations to obtain the responses from the girder. Three different scenarios have been considered to avoid the influence of noise. Further, numerical simulation of the bridge subjected to train loading at different speeds was carried out using ANSYS to obtain synthetic data of strain response from the validated finite element model. Analysis was carried out for normal as well as for futuristic speed of the trains. Responses obtained from field measurements as well as from numerical investigations were used to calculate the damage indices. Based on the damage indices, remaining fatigue life of the bridge was evaluated. The present study can be helpful in assessing the health condition of the railway bridges and to check the suitability of further increase in axle load or speed of trains.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have