Abstract
The enhancement of the reliability of the silicon-based III–V quantum well lasers, especially of those on an on-axis Si (001) substrate, is of great importance now a days for the development of Si-based photonic and even optoelectronic integrated circuits and is really quite challenging. As an experimental advancement, mainly by inserting a pair of InAlAs strained layers separately into the upper and lower AlGaAs cladding layers to effectively prevent the formation of the in-plane gliding misfit-dislocations within the boundary planes of the active region, the longest room-temperature and continuous-wave lifetime of the InGaAs/AlGaAs quantum well lasers on an on-axis Si (001) substrate with a cavity length of 1500 µm and a ridge width of 20 µm has been prolonged from a very initial record of ∼90 s to the present length longer than 31 min. While, the highest continuous-wave operation temperature of another one with a cavity length of 1000 µm and a ridge width of 10 µm has been shown as 103 °C with an extracted characteristic temperature of 152.7 K, further enhancement of the device reliability is still expected and would mainly depend on the level of the threading-dislocation-density reduction in the GaAs/Si virtual substrate.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have