Abstract
In precision engineering, the use of compliant mechanisms (CMs) in positioning devices has recently bloomed. However, during the course of their development, beginning from conceptual design through to the finished instrument based on a regular optimization process, many obstacles still need to be overcome, since the optimal solutions often lie on constrained boundaries or at the margin of safe/unsafe domains. Accordingly, if uncertainty occurs during the fabrication or operation of the mechanism, it might lose its functions, rendering the design infeasible. This paper proposes a universal design process for positioning CMs, consisting of two steps: optimal design of the pseudo-rigid-body model, and reliability-integrated multi-objective optimization design using NSGA-II algorithms. This optimization algorithm is applied in the design of a feed drive mechanism for micromachining. The optimal design is also fabricated and tested. The results calculated for the displacement amplification ratio, natural frequency, and input/output stiffness using different approaches, including analytical methods, simulations, and experiments, were compared to evaluate the efficiency of the proposed synthesis method, and show discrepancies of less than 5%. Thus, the results convincingly support the applicability of the proposed optimization algorithm for the design of other precision-positioning CMs prone to failure in vulnerable conditions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.