Reliability Analysis of Crack Growth Occurrence for a Secondary Hull Component due to Vibration Excitation

Abstract

Abstract Ship hull vibration is a significant contributor to fatigue crack growth and the major sources of vibrations are found to be the main engine vibration excitation, the wave-induced springing and whipping loads, and the action of the propeller. In the midship region, wave-induced loads and the main engine are the major contributors, whereas propeller excitation dominates in the aft region of the ship hull. No general method exists to solve all kinds of vibration problems and they need to be evaluated through a cost-by-case approach. The complex and uncertain aspects of hull vibration and fatigue crack growth motivate the need for a reliability-based scheme for assessing the resulting fatigue crack propagation. In the present paper, a probabilistic formulation for the failure probability of the occurrence of crack propagation of a secondary hull component is outlined. A generic cargo hold model is analyzed with engine excitation and wave-induced loading as vibration sources, and a stochastic model for vibration response is outlined. The limit state is formulated as the possible occurrence of fatigue crack growth. The secondary hull component considered is a pipe stack support, which is a supporting component that attaches the cargo pipes to the wall inside a cargo tank. Different initial crack sizes are implemented to evaluate the adequacy of the applied stochastic model for vibration response and the accuracy of the estimated failure probability is assessed.