Abstract
Lead-free Bi0.495(Na0.8K0.2)0.495Sr0.01Ti1−x (Fe0.5Me0.5) x O3 ceramics with x = 0−0.03/0.04 mol (Me = Nb, Sb and Ta, abbreviated as FN0.5–FN4, FS0.5–FS3 and FT0.5–FT3, respectively) were fabricated by a conventional solid-state reaction method. The effects of B-site complex ions content on relaxor phase evolution and electromechanical properties were systematically investigated. Results showed that the modification of FN, FS and FT complex ions can significantly reinforce the B-site compositional disorder, effectively destroy the long-range ferroelectric order and tune the ferroelectric–relaxor transition point (T FR) to around room temperature. The relatively high strain performances (dynamic $$d_{{33}}^{*}$$ values) of 567, 550 and 600 pm/V were obtained in FN2, FS1.5 and FT2 critical compositions, respectively. The large strain responses are closely associated with the reversible relaxor–ferroelectric phase transformation. Furthermore, the electrostrain of FT2 sample presents a temperature-insensitive characteristic with the variation less than 10% up to 120 °C. These findings indicate that the B-site complex ions modified NBT-based ceramics can be considered as promising candidates for lead-free electromechanical actuator applications.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.