Relative Permeability Modifier Treatments on Gulf of Mexico Frac-Packed and Gravel-Packed Oil and Gas Wells

Abstract

Abstract Estimates of worldwide oilfield water production are as high as 300 to 400 million barrels of water per day (bwpd), while oil production is only 75 million barrels per day (bopd)1. Put in different terms: for every 1 bopd produced, our industry produces approximately 4 to 6 bwpd, and for many depleted areas of the world this oil-to-water ratio can be much higher, reaching up to 1:100. Excessive water production from oil and gas wells can cause serious reductions in well productivity and significantly increases operating expenses. In an attempt to reduce the oil industry's dilemma related to water production, there has recently been an increased interest in water control treatments using relative permeability modifiers (RPM). A new and unique RPM polymer is yielding significant economic benefits by increasing hydrocarbon production from treated wells. Generally, RPMs are designed to control water production from high permeability streaks or due to coning issues. The polymer adheres to formation rock exposing its hydrophilic (water-loving) side to the pore throats. The RPM restricts water movement through the pore throat by reducing the effective size of the throat in the presence of water and by increasing drag on formation water flowing through the reservoir matrix. Because it deforms in the presence of hydrocarbons, the RPM typically does not adversely effect oil or gas flow. The newly developed RPM (along with careful selection of well candidates, correct treatment design, and proper placement) is helping increase the success of RPM treatments. This paper will discuss the application and economic benefits from using the new low-risk RPM polymer. Multi-well RPM matrix treatments were performed on offshore Gulf of Mexico (GoM) frac-packed and gravel-packed wells. One particular RPM treated gas well showed a significant decrease in water production, a five fold increase in gas production and double the amount of oil. Payout for the entire treatment was just 7 days.