Relative Permeability at Near-Critical Conditions

Abstract

SummaryWe have measured a series of two-phase drainage relative permeability curves at near-critical conditions by means of the displacement method. As a fluid system we have used the model system methanol/n-hexane that exhibits a critical point at ambient conditions. In the measurements we have varied the interfacial tension and the flow rate.Our results show a clear trend from immiscible relative permeability functions to miscible relative permeability lines with decreasing interfacial tension and increasing superficial velocity. The relative permeability measurements show that the controlling parameter is the ratio of viscous to capillary forces on a pore scale, denoted by the capillary number Nc=k‖∇Φ‖/ϕσ.To demonstrate the significance of using the proper relative permeability functions, we have calculated the well impairment due to liquid drop-out in a model gas condensate reservoir, for four different rock types showing four different relations between relative permeability and the capillary number. The calculations show that near-miscible relative permeability functions come into play in the vicinity of the well bore. This is contrary to what happens if the relative permeability would be a function of interfacial tension alone. In addition, the results show that well impairment by condensate drop-out may be significantly overestimated if the dependence of relative permeability on the capillary number is ignored.