Relative Hardening Contributions and Ductility of As-prepared and Annealed Nanocrystalline Co-P Electrodeposits

Abstract

The effect of annealing up to 538 °C (1000 °F) on the hardness and ductility of two electrodeposited bulk nanocrystalline cobalt-phosphorus alloys (L-nCoP, 0.14 at%P and H-nCoP, 2.17 at%P) was investigated. Through a combination of electron microscopy and X-ray/synchrotron diffraction characterization, hardness and bend ductility measurements as well as density functional theory calculations, it is shown that hardness is controlled by four additive contributions. At 0.14 at%P, grain size strengthening and likely grain boundary relaxation are the dominant strengthening mechanisms. In the 2.17 at%P alloy, the contributions from solute strengthening and cobalt phosphide precursors and precipitates are much more significant and typical age strengthening behavior is observed with a peak hardness temperature of 371 °C (700 °F). The bend ductility at 0.14 at%P was in the 12 – 17% range up to 482 °C (900 °F). In contrast, the ductility at 2.17 at%P decreased rapidly with increasing annealing temperatures approaching values less than 1% at 427 °C (800 °F) due to excessive cobalt phosphide precursor and precipitate formation. The dominant deformation mechanism in both alloys was found to be basal dislocation slip.