Abstract
The fracturing of four different polyolefin materials (a polypropylene homopolymer, a propylene–ethylene copolymer, a polyethylene homopolymer, and an ethylene–hexene copolymer) was studied with the objective of developing a better understanding of the relationships between the morphology of semicrystalline polymers, the morphology and growth kinetics of their fracture surfaces, and their mechanical properties. A scanning electron microscope and an optical microscope were used to obtain images of the fracture surfaces. The samples were injection-molded or hot-pressed to generate different microstructures. Fracture experiments were performed at 23, 0, and −20°C to generate fracture surfaces with different morphologies from the same supermolecular structure. It appears that the fracture propagates through the spherulites in a brittle manner. The macroscopic aspect of the fracture surfaces is temperature-independent and changes are visible only at the microscopic scale. Over the range of temperatures studied, the rms roughness [root mean square roughness decreased by only about 20%, while the fracture energy of all but one of the materials (a high-density ethylene–hexene copolymer) decreased by about 60% as the temperature was reduced. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2370–2382, 2000
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
