Relation of transverse compression properties and the degree of brown rot biodeterioration of Pinus glabra in the soil block test

Abstract

Abstract Improved methods are needed for detecting and quantifying the effect of decay fungi on wood products. The focus of the present paper is a soil block decay test with exposure to the brown rot fungus Gloeophyllum trabeum, where the changes in elasticity and strength were compared in both the radial and tangential directions as a function of the decay degree. The stress-strain analysis was employed by a transverse compression (transC) testing technique in which a load was applied over the specimen’s tangential or radial surface. It was found that early effects of decay were detected in either direction of loading, but the overall reduction in elasticity and compression strength after 7 days of exposure to the fungus was approximately two times greater in the radial direction. This difference is interpreted that decay occurs mainly in the earlywood (EW). Significant strength loss at 5% compression was detected after 2 days of exposure to the fungus. However, 3 days of exposure was required before significant strength loss was evident as a result of the reduction in modulus of elasticity (MOE) or mass loss (ML). In comparison to ML, the compression strength loss was found to be a more sensitive measure of wood decay.