Abstract
Extreme and prolonged rainfall in the Tunka Ridge caused several debris flows in the vicinity of the Arshan village (Siberia, Russia) on June 28, 2014. These debris flows, in spite of similar geological conditions, had different velocity, peak discharge and alluvial fan volume values. The flow velocity was from 3.5 m/s to 19.6 m/s, the peak discharge ranged from 63 m3/s to 13566 m3/s, and the alluvial fan volume varied from 4.13×103 to 8.45×105 m3. Such a great range of values is due to the morphometric parameters of the debris flow basins. The article deals with the influence of morphometric parameters of debris flow basins, such as the basin area, the average slope, Melton ratio, relief ratio on the debris flow velocity, peak discharge and volume of alluvial fans. In this debris flow event the average values of slope angle and total basin relief of the debris flow basins did not affect the values of debris flow velocity, peak discharge and alluvial fan volume. The highest correlations were observed with the debris flow basin area that was connected with the water inflow volume into the debris flow basins during the rainfall. The unequal water distribution among debris flow basins also had an impact on the debris flow velocity, peak discharge and volume of alluvial fans.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
