Abstract

New shape memory alloys have been developed in the last few years with high martensitic transformation temperatures. However, the highest martensitic transformation temperatures are lower than 200°C and they are achieved with very complex alloys. New Cu-Al-Ag shape memory alloys have been developed with martensitic transformation temperatures ranging from 250 to 400°C. It is really interesting to increase the knowledge of the phase stability behaviour when cycling the alloy above or below the martensitic transformation temperature because of the high temperatures involved. Two Cu-Al-Ag shape memory alloys with very different composition have been thermal cycled in a DSC following the amount of energy release during the forward and reverse transformation and the changes of the martensitic transformation temperatures in order to follow the phase changes that takes place during cycling.

Highlights

  • New shape memory alloys have been developed in the last few years with high martensitic transformation temperatures

  • the highest martensitic transformation temperatures are lower than 200 °C

  • they are achieved with very complex alloys

Read more

Summary

INTRODUCCIÓN

Las aleaciones con memoria de forma (AMF) presentan propiedades específicas Dad de amortiguamiento, superelasticidad y termoplasticidad) que permiten su empleo en nuevas aplicaciones tecnológicas, o la sustitución ventajosa de materiales convencionales en aplicaciones ya conocidas. Las dos fases ((3 y martensita) responsables del Efecto Memoria de Forma (EMF) son (c) Consejo Superior de Investigaciones Científicas Licencia Creative Commons 3.0 España (by-nc). Metaestables, por lo que tienden a generar las fases de equilibrio si la temperatura es suficientemente elevada para favorecer fenómenos difusivos. En el caso de la nueva familia de aleaciones basadas en el sistema ternario Cu-Al-Ag, la adición de plata al sistema básico Cu-Al permite que las temperaturas de transformación martensítica sean muy elevadas (en comparación con otras AMF base cobre) (1). En el presente trabajo se aborda el estudio de la influencia que el ciclado térmico tiene sobre la transformación martensítica de dos aleaciones Cu-Al-Ag de diferente composición, con el objeto de obtener una primera aproximación a la influencia que el proceso de envejecimiento tiene en su comportamiento

MÉTODO EXPERIMENTAL
RESULTADOS
DISCUSIÓN
CONCLUSIONES
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call