Rejection of trace organic compounds by high-pressure membranes

Abstract

High-pressure membranes, encompassing reverse osmosis (RO), nanofiltration (NF), and low-pressure RO, may provide an effective treatment barrier for trace organic compounds including disinfection by-products (DBPs), pesticides, solvents, endocrine disrupting compounds (EDCs) and pharmaceutically active compounds (PhACs). The objective is to develop a mechanistic understanding of the rejection of trace organic compounds by high-pressure membranes, based on an integrated framework of compound properties, membrane properties, and operational conditions. Eight trace organic compounds, four DBPs and four chlorinated (halogenated) solvents, are being emphasized during an initial study, based on considerations of compound properties, occurrence, and health effects (regulations). Four polyamide FilmTec membranes; three reverse osmosis/RO (BW-400, LE-440, XLE-440) and one nanofiltration/NF (NF-90); are being characterized according to pure water permeability (PWP), molecular weight cutoff (MWCO), hydrophobicity (contact angle), and surface charge (zeta potential). It is noteworthy that rejections of compounds of intermediate hydrophobicity by the candidate membranes were observed to be less than salt rejections reported for these membranes, suggesting that transport of these solutes through these membranes is facilitated by solute-membrane interactions. We are continuing with diffusion cell measurements to describe solute-membrane interactions by estimation of diffusion coefficients through membranes pores, either hindered or facilitated.