Rejection of As(III) and As(V) from arsenic contaminated water via electro-cross-flow negatively charged nanofiltration membrane system

Abstract

Abstract A specially designed electro-cross-flow nanofiltration (NF) membrane system was used for this investigation. To enhance the rejection of arsenic ionic species like H2AsO4−, a NF membrane having a negative surface charge was fabricated via the interfacial polymerization process. The membrane was characterized by SEM, AFM, surface charge density, molecular weight cut-off (MWCO), total and skin thickness and pure water flux. The parameters that affected the rejections of As(III) and As(V) were studied; they included the initial arsenic concentration, the applied potential, pH of the feed, the cross-flow filtration pressure and the presence of different salts in the feed. Among those parameters, the pH of the feed greatly affected As(V) rejection; As(V) ([As(V)]o = 1000 ppb) rejection was increased from 72.3 to 98.5% when pH of the feed was changed from 3.0 to 10.0. This might be due to the fact that higher pH enhanced the formation of negative divalent anion like HAsO42− which should be rejected more effectively by the negative surface charge of the NF membrane. Beside the effect of the negative surface charge of the membrane, applied potential increased the As(V) rejection by 48.2% when the applied potential was increased from 0 to 2.0 V for a feed containing 1000 ppb initially. For the same change of applied potential rejection of As(III) was increased from 52.3 to 70.4%; this might be the result of the formation of anionic species like H2AsO3− from the neutral molecule of H3AsO3 by the applied potential.