Abstract
Noil hemp fibre (NHF) is a kind of textile hemp fibre after deep degumming from scutched hemp fibre (SHF), mechanically-degummed hemp fibre. Both NHF and SHF with strong mechanical properties are good candidates as reinforcing fibres for plastics such as polypropylene (PP). The PP/NHF and PP/SHF composites were blended via internal mixing process. The effect of fibres on the morphology, thermal resistance and reinforcement of the composites were investigated. PP/NHF composites showed higher impact strength, lower flexural strength than PP/SHF at the corresponding loading because NHF has smaller diameter and better thermal resistance than SHF. Meanwhile, NHF has the similar reinforcement to tensile strength with SHF. The effect of maleic anhydride polypropylene (MAPP) on the fibre-resin interface bonding was also comparatively studied. With increasing amount of MAPP, the tensile, flexural and impact strengths of PP/NHF and PP/SHF increased, respectively. The morphology of PP/SHF and PP/NHF results well showed that MAPP improved the interaction of the fibres with PP through chemical adhesion.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
