Abstract

Redundant manipulators are widely used in fields such as human-robot collaboration due to their good flexibility. To ensure efficiency and safety, the manipulator is required to avoid obstacles while tracking a desired trajectory in many tasks. Conventional methods for obstacle avoidance of redundant manipulators may encounter joint singularity or exceed joint position limits while tracking the desired trajectory. By integrating deep reinforcement learning into the gradient projection method, a reactive obstacle avoidance method for redundant manipulators is proposed. We establish a general DRL framework for obstacle avoidance, and then a reinforcement learning agent is applied to learn motion in the null space of the redundant manipulator Jacobian matrix. The reward function of reinforcement learning is redesigned to handle multiple constraints automatically. Specifically, the manipulability index is introduced into the reward function, and thus the manipulator can maintain high manipulability to avoid joint singularity while executing tasks. To show the effectiveness of the proposed method, the simulation of 4 degrees of planar manipulator freedom is given. Compared with the gradient projection method, the proposed method outperforms in a success rate of obstacles avoidance, average manipulability, and time efficiency.

Highlights

  • Compared with traditional robotic manipulators, redundant manipulators have more degrees of freedom (DOF) in joint space than task space, which possesses better flexibility for complicated tasks

  • Motivated by gradient projection method (GPM) and deep reinforcement learning (DRL), we propose a reactive obstacle avoidance method for redundant manipulators

  • In Stage I, the manipulator starts from a fixed configuration and learns to avoid obstacles in null space

Read more

Summary

Introduction

Compared with traditional robotic manipulators, redundant manipulators have more degrees of freedom (DOF) in joint space than task space, which possesses better flexibility for complicated tasks. Redundant manipulators are widely used in fields such as human-robot collaboration [1], medical surgery [2], and space exploration [3]. The manipulator may collide with people or other obstacles during the movement, which requires the capability of real-time obstacle avoidance. In many tasks, such as polishing and welding, the manipulator is obliged to track the desired trajectory under complex physical constraints. Manipulators need to achieve real-time obstacle avoidance while completing given end-effector motion tasks

Methods
Results
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call