Reinforced ECC-UHPC-SCC composite modular framed shear wall systems under lateral cyclic loading

Abstract

The shear strength and deformability of high performance reinforced composite framed shear wall systems made of Engineered Cementitious Composite (ECC), Ultra-High-Performance Concrete (UHPC) and Self-Consolidating Concrete (SCC) subjected to lateral cyclic shear loading to failure were investigated. A total of seven framed shear wall specimens were constructed using combinations of ECC or SCC wall, SCC frame and ECC or UHPC frame joints. The performance of such novel modular forms of walling systems were compared based on experimental results in terms of cracking, failure mode, hysteretic shear load-deformation response, shear load capacity, ductility, bearing capacity degradation, stiffness degradation, dissipated energy, viscous damping capacity, induced wall shear stresses and strain development characteristics. ECC walling system exhibited better structural performance compared to their SCC counterparts showing up to 40% higher load capacity forming significantly higher number of closely spaced diagonal cracks with up to 72% lower crack shear stress, 14% to 21% higher ductility, up to 2 times higher energy dissipation capacity and lower rate of stiffness/bearing capacity degradation through both hysteretic and damping actions. The incorporation of ECC and ECC or UHPC joint in frame significantly improved shear strength capacity of infill wall and overall framed shear wall system. ECC incorporated framed shear walls even with frames made of SCC and UHPC joints also exhibited superior performance. This study confirmed the superior performance of ECC material for the construction of reinforced framed shear wall with boundary frame made of ECC/SCC/UHPC combinations for better seismic resistance.